KLD802 Radar Level Sensor_Flange Type_For Slightly Corrosive Liquids/Solids

The 80G radar level sensor adopts frequency modulated continuous wave (FMCW) technology, and transmits a high frequency continuous frequency modulated radar signal through its antenna. The transmitted signal is reflected by the medium and received by the antenna as echoes with different frequencies. The change in frequency is proportional to the distance and converted to material level height.

Introduction

The 80G radar level sensor adopts frequency modulated continuous wave (FMCW) technology, and transmits a high frequency continuous frequency modulated radar signal through its antenna. The transmitted signal is reflected by the medium and received by the antenna as echoes with different frequencies. The change in frequency is proportional to the distance and converted to material level height.

KLD802  80G ultra-high frequency radar instrument uses a non-contact measurement method to measure the level of liquid and solid media. They measure a wide variety of liquid media, even at high pressures and extreme temperatures. Such as solvent measurement, corrosive medium measurement, hygienic measurement, etc. At the same time, it can also measure light and heavy solids stably and reliably. Even strong dust and noise, adhesion and condensation will not affect the measurement results.

Feature

1. Non-contact measurement.
The measurement will not be affected by changes in medium properties or process conditions, such as temperature, pressure or dust intensity. Adjusting settings is easy, eliminating the need for filling and emptying containers, saving time during instrument start-up, and making the instrument virtually maintenance-free.

2. Large measuring range and small blind area
The measurement range is 0.1~120m, which basically meets the measurement requirements of on-site working conditions.

3. The antenna size is small, the beam angle is small, and the focusing ability is strong
It is convenient for radar on-site installation. It has stronger anti-interference ability for the environment inside the tank. For example, there are stirring, heating coils, baffles, etc. in the tank or the measurement effect in the straight pipe is still good.

4. High precision
The accuracy can reach ±2mm, which can fully meet the accuracy requirements of non-metering field working conditions.

5. The signal wavelength is short
It is better for the measurement of the level of powder, particles and so on.

Specification

 

Medium  non-corrosive liquid, slightly corrosive liquid
Measuring range  0.1m~10/20/30/60/100m
Process connection  flange ≥ DN80
Process temperature  -40~110℃
Process pressure  -0.1~1.6MPa
Antenna size ​ 32mm lens antenna
Antenna material  PTFE
Accuracy  ±2mm (range below 35m) ±5mm (range between 35m and 100m)
Protection class  IP67
Center frequency  80GHz
Launch angle  3°
Power supply  two-wire /DC24V
 four-wire /DC12~24V
 four-wire /AC220V
Casing  aluminum/plastic/stainless steel
Signal output  two-wire: 4…20mA/HART protocol
 four-wire: 4…20mA/ RS485 Modbus

Product Dimension
Unit in mm:
KLD802 Radar Level Sensor Dimensions

 

case

aluminum/stainless steel

color

Blue, red, yellow

Accuracy

±2mm (range below 35m)
±5mm (range between 35m and 100m)

Launch angle

3°

Antenna material

PTFE

Water Quality monitor Redefining Standards Assessment
water quality monitor

Water Quality monitor Redefining Standards Assessment

In an ever-changing world where environmental concerns are at the forefront of our collective consciousness, the need for precise and dependable tools to safeguard our most precious resource—water—has never been more crucial. Enter the Water Quality Monitor, a technological marvel that stands as a sentinel of liquid purity in an age where water quality is paramount. Imagine a device that

Read More »
Unveiling the KWS800 Water Quality Monitoring System
sensor

Unveiling the KWS800 Water Quality Monitoring System

Water is a vital resource that sustains life on Earth, and its quality is a cornerstone of environmental health. As human activities continue to impact water bodies, the need for effective water quality monitoring system has never been more pronounced. These systems play a pivotal role in assessing, preserving, and improving the condition of water resources, ensuring their suitability for

Read More »
display
Oxygen Sensor

Can turbidity measured by COD sensor replace TSS sensor

In the field of environmental monitoring and water quality analysis, it is crucial to find accurate and cost-effective detection methods. Chemical oxygen demand (COD) and total suspended solids (TSS) are two important indicators for assessing the degree of water pollution. This article will explore a fascinating question: Can turbidity measured by COD sensor replace TSS sensor? In this blog, we

Read More »
water quality monitor
water quality monitor

Water Quality Monitor: Ensuring a Safer Future Through Monitoring

Water is essential for life, and its water quality monitor plays a crucial role in maintaining the health and well-being of humans, animals, and the environment. Whether you’re drinking a glass of water, swimming in a pool, or using water for industrial purposes, it’s vital to ensure that the water is safe and free from harmful contaminants. This is where water quality

Read More »

Related Products

Contact us to get a quote

Your inquiry will be responseed in 12 hours .
For any urgent case, you can contact us via whatsapp or phone.

whatsapp
Tel
thank-you