KUF100 Clamp-on ultrasonic flow meter for small pipes

Introduction

This series of Clamp-on ultrasonic flow meter for small pipes is an industrial time-difference type ultrasonic flowmeter. It applies the latest industrial-level PFGA, which extremely improves the signal sampling frequency and bubble tolerance rate; the self-developed TGA technology makes it be capable of dealing with more complex logic and calculation to provide more accurate and faster measurements, and ensures the flowmeter could endure non-continuous bubbles or impurities within 5 sec. In addition, it could be installed and operated in a convenient way with no need to break the pipe or cut off the fluid or stop work.

Feature

Simple installation and convenient operation. There is no need to break the pipe or stop for a long time for construction, and the installation can be easily completed within a few minutes.
It adopts a new clamp-on design without touching the measuring medium. It can avoid pressure loss and medium pollution caused by traditional flowmeters.
A variety of modes can be set, flexible and diverse.
A set of machines can be used for all diameters within the measuring range, and is suitable for various metal pipes and resin pipes.
Super large screen display. The display content is diverse and man-machine friendly.
It can be selected as an ultrasonic cold (heat) meter to realize the monitoring and measurement of energy consumption.

Technical Specifications

Supported Pipe Materials	stainless steel, iron, brass, aluminum, PVC, PP, PVDF and other rigid plastic pipes
Supported Liquid Medium	Water or other (single without solid particles and impurities)
Supported Medium Temperature	0-75°C (no freezing on the surface, high temp, version customizable)
Default Low Flow Cutoff	0.1m/s
Display Method	256*128 backlit LCD
Response Time	0.5~60s
Accuracy Class	±2%, up to ±1% after calibration
Data Storage Period	300 milliseconds
Memory Backup	EEPROM (data storage length: more than 10 years, data read/write frequency: more than 1 million times)
Power And I/O Connectors	M12 aviation plug
Output	4-20mA
Communication	Modbus RS485
Optional Output	OCT (pulse output) / one relay alarm
Power Supply	10-24V VDC
Electric Power	＜3W
Circuit Protection	Power reverse protection, power surge protection
Circuit Protection	Each output short-circuit protection, each output surge protection
Protection Level	IP65
Ambient Temperature	-10 to 60°C (no freezing)
Relative Humidity	35 to 85% RH (non-condensing)
Vibration Resistance	10 to 55 Hz, double amplitude 1.5mm, 2 hours each for XYZ axes
Impact Resistance	100m/s2 16 ms pulse, X, Y, Z axis each 1000 times
Meter Material	aluminum alloy, industrial plastic
Cable Length	Standard 2 meters, (PT1000 standard 9 meters)